DURO - VIRO 7905 V09 Rotating Spike Electric Lock

    Brand: DURO

    V09 electric lock is the only high-reliability lock specially designed for use on outdoor, manual or automated sliding gates.
    The special spike mechanism will tolerate a thermal expansion in the dimensions of sliding gates of up to 9.6 mm. 
    A thermal expansion of 9.6mm is the equivalent to a change in temperature of 100ÂșC for a 8 metre long gate. Also suitable for manual sliding gates (fitted with a double through cylinder).
    Unlike closing systems with padlocks, chains and standard mechanical shackle locks, the V09 lock offers new and effective levels of security. It is easy to use, of pleasing design, weatherproof and cannot be attacked from the outside.
    Installation: horizontal on the fixed upright of the sliding gate
    Backset: 50mm
    Opening pulse time: controlled by an electronic board, can be interfaced with gate automation system
    Voltage: 12V A.C., or 24V A.C. / D.C. (24V recommended)
    Case: one-piece galvanized steel, cable entry on the back (for maximum protection) or on the side (opening a prepunched hole)
    Cover: galvanized steel, with automatic security block when the lock is closed
    Rotating spike dead-bolt: high impact proof, protected by case hardened and galvanized steel rotating rings resistant to attack, inserted in NIPLOY nickel-plated steel guides and operated by inox stainless steel springs
    Cylinder: provided with half cylinder 1.772.9, or profile half cylinder with length 40mm (30+10) with DIN or universal cam
    Mechanism (of the half cylinder 1.772.9 provided):
    - brass pins
    - mushroom brass counterpins, pick resistant
    - phosphor bronze pin springs
    Striker: galvanized steel, easily fitted with the practical lock alignment template
    Supplied with: galvanized steel striker for horizontal installation, galvanized steel roof-plate and striker plate, electronic board with possibility of interfacing with gate automation systems, Torx key for opening/closing cover, galvanized steel cylinder, support nylon ring nut and plug, fixing screws
    Weight: 2530g

    Terms of service

     

    Defective or Damaged Products

    1.1 Except for products that are defective or damaged upon delivery to you, all products cannot be returned or exchanged.

    1.2 If you receive a defective or damaged Product, you must notify Unidbox in accordance with Clause 7 within 7 days after the day following the delivery of the Product, after which Unidbox shall have no liability to you. Unidbox's obligation to you in respect of such notification will be at its option to:

    • Replace any Product that is defective or damaged; or

    • Refund to you the amount paid by you for the relevant Product to the original method of payment.

    Product Review

    There are yet no reviews for this product.